Description

DEIF RUDDER/AZIMUTH ANGLE TRANSMITTER

Transmitter type Analogue 2-wire 4 to 20 mA
Output range 4.0 to 20.0 mA
Max. range (angle out of range) 3.8 to 20.2 mA
Operating voltage (VCC) 7.5 to 35.0 Vdc
Load resistance
(sum of all loads of connected input
devices and cable)
Max. 500 Ω at ≥18 V supply
Max. 800 Ω at ≥24 V supply (refer to the paragraph Driving capability)
Capacitive load max. 100 nF
Reverse aux. voltage protection Yes
Measuring angle electrical 360 deg.
Rotation direction Default clockwise (CW) seen into the shaft
Programmable to counterclockwise (CCW)
Zero point at 12 mA Freely programmable within 360 deg. *)
Angle range Freely programmable:
Recommended +/-20 deg. to +/-180 deg.
Default +/-45 deg. *)
Linearity
Angle span up to +/-180 deg.
Better than:
±0.25 deg.
Update rate ≥7 Hz
Hysteresis and repeatability ≤0.1 deg.
Temperature coefficient ≤100 ppm
Programming 3-wire: S1, S2 and SC (common) sequence programming
● Direction change: CW/CCW
● Zero set
● Full scale calibration (max./min.)
or alternatively
● Half scale calibration (½ max./½ min.)
Output and programming wire shortcircuit
protection
To VCC and GND
Protection IP67
Temperature Operating: -40 to 80 °C
Storage: -40 to 80 °C
Torque (start/rotate) <0.25 Nm
Shaft load (axial/radial) 500 N/1000 N
Material Housing: Aluminium
Shaft: Stainless steel
Vibration 4 g, 2 to 2000 Hz all axes
Shock 50 g, half sine, 10 to 15 ms, 50 cycles