All products presented on this website are subjected to extensive checks from our team of engineers and mechanics. Althought,we can not offer a full guarantee for any of our products, as they are used parts from third parties. The limited liability guarantee that comes with these products is extensively analysed here. Please contact our Support Lineif you have any questions about our products guarantee.
ℹ️ Additional Information
| Condition |
USED/GOOD WORKING CONDITION |
|---|---|
| Manufacturer |
DATEXEL |
| Product Code |
300.999.02473 |
📦 Guarantee Terms
🗂️ Product Files
🖹 Description
Input
Sensor type 2 or 3 wire Pt100 in according to IEC60751 standard
Minimum input Span 50 °C (122 °F)
Zero programmability From -50 °C (-58 °F) up to + 50 °C (122 °F)
Span programmability From 50 °C (122 °F) up to 650 °C (1202 °F)
Sensor excitation current 0.6 mA typ.
Line resistance influence 0.05 % of f.s./ohm (100 ohm max. balanced per wire)
Output
Signal type 4 ÷ 20 mA on current loop
Burnout condition Positive out of scale (>20 mA)
Maximum output signal 32 mA
Load resistance (Rload) see “Load characteristic”
Response time (from 10 to 90 % of f.s.) 300 ms
Warm-up time 3 minutes
Performances
Calibration error ± 0.1 % of f.s.
Linearity error (*) ± 0.15 % of f.s.
Thermal drift 0.020 % of f.s./°C
Power supply voltage (**) 10 ÷ 30 Vdc
Electromagnetic Compatibility (EMC)
( for industrial environments ) Immunity: EN 61000-6-2; Emission : EN 61000-6-4.
Operating temperature -20 to 70 °C
Storage temperature -40 to 85 °C
Relative humidity (non cond.) 0 to 90%
Maximum Altitude 2000 m
Installation Indoor
Category of installation II
Pollution Degree 2
Weight approx. 80 g
Mechanical Specifications
Material Self-extinguish plastic
IP Code IP20
Wiring wires with diameter 0.8÷2.1 mm2
/AWG 14-18
Tightening Torque 0.8 N m
Mounting in compliance with DIN rail standard EN-50022 and EN